Schleuniger JS8300 Cable Jacket Stripping Machine
The Schleuniger JS8300 Jacket Stripping Machine is a table-top system capable of precision stripping and slitting the outer jackets of cables. Once the precisely defined circumferential and/or longitudinal cut has been made, the jacket section concerned can be easily removed by hand. A special feature of this machine involves a rotary circumferential cut whereby the floating blades follow the contour of the insulation. Its advantage lies in an even cut of consistent depth as the blade adapts to the profile of the jacket. This design permits the precise, radial incision of round as well as out-of-round or irregularly shaped insulation as in the case of certain cables with twisted inner conductors.
When processing strongly adhesive insulation or stripping long jacket sections, the machine
lets you slit the jacket lengthwise, again with the cutting depth precisely following the contour of the cable.
Features:
Technical data
Dimensions: 450 x 280 x 320 mm (17,5 x 11 x 12.5") without extension tube
Weight: 23 kg (50.7 lbs)
Strippable cable diameters: 3 - 25 mm (1/8 - 1.0")
Stripping length:
with length stop: 10 - 500 mm (3/8 - 20")
without length stop: 0 - unlimited
Increments length stop: 1 mm (1/16")
Cutting depth: 0 - 3 mm (0 - 1/8")
Increments dial rings: 0.05 mm (0.002")
Power supply: 85 - 264 VAC / 50 - 60 Hz / 110 VA
Compressed air Pressure at the JS 8300: 5 - 7 bar (75 - 100 psi)
Pressure air filter regulator (Option): max. 10 bar (150 psi)
Compressed air consumption: max. 20 l/min (5-1/4 gallons/min
Noise level: 67 dB (A)
Fuses: 3,15 AT
When processing strongly adhesive insulation or stripping long jacket sections, the machine
lets you slit the jacket lengthwise, again with the cutting depth precisely following the contour of the cable.
Features:
- Automatic quad-chuck centering or Guide tube centering
- Strips irregularly shaped insulation
- Radial cut
- Axial cut
- cable diameters: 3 - 25 mm (1/8 - 1.0")
- Stripping length with stop: 10 - 500 mm (3/8 - 20")
- Stripping length without stop: 0 - unlimited
Technical data
Dimensions: 450 x 280 x 320 mm (17,5 x 11 x 12.5") without extension tube
Weight: 23 kg (50.7 lbs)
Strippable cable diameters: 3 - 25 mm (1/8 - 1.0")
Stripping length:
with length stop: 10 - 500 mm (3/8 - 20")
without length stop: 0 - unlimited
Increments length stop: 1 mm (1/16")
Cutting depth: 0 - 3 mm (0 - 1/8")
Increments dial rings: 0.05 mm (0.002")
Power supply: 85 - 264 VAC / 50 - 60 Hz / 110 VA
Compressed air Pressure at the JS 8300: 5 - 7 bar (75 - 100 psi)
Pressure air filter regulator (Option): max. 10 bar (150 psi)
Compressed air consumption: max. 20 l/min (5-1/4 gallons/min
Noise level: 67 dB (A)
Fuses: 3,15 AT