Komax Kappa 340 RIU - Wire and Cable cutting and stripping machine
The versatile Kappa 340 is ideally equipped for all the challenges of modern wire processing, both now and in the future: It has a standard powerful dual cutting head combined with a rotary incision unit. Together with its high torque belt drive, it handles complex processing sequences quickly and efficiently. A two-stage length measuring system ensures precise wire processing even in the most difficult processing situations. Komax Kappa is synonymous with speed, efficiency and reliability.
The Kappa 340 handles the precise processing of uneven cable surfaces, battery, multicore, HV and sensor cables as well as hard, tough, thick and thin insulation. The Kappa 340 is equipped for all requirements: The dual head double cutting head with various V, V-radius and form blades processes wires with a thickness of 0.22 to 70 mm² and ribbon cables up to a width of 16 mm. For short changeover times and precise round cuts, the Kappa 340 can be expanded with the rotary cutting unit. Thanks to the rotation, slitting, stripping and cutting blades as well as the belt drive with high torque and good grip, even difficult wires can be processed efficiently at up to 4 m/s. TopWin can be used to produce complete parts lists, sequences as a multilead set or as a wire harness. It is also possible to label the wires, connect to the company network and print goods despatch notes. Precise processing with the dual head including form blade Two blade positions (dual head) for different V-blades, V-radius blades and/or optional form blades with support plates enable a wide range of applications. |
Belt drive with high torque and long supporting surface
Complex processing sequences can be processed quickly and efficiently with the high-torque belt drive and long supporting surface for optimum grip.
Technical Specifications
Wire length, processing on both sides min. 1 mm
Wire length max. 800000 mm
Strip lengths, full stripping side 1 max. 180 mm
Strip lengths, full stripping side 2 max. 50 mm
Strip lengths, partial stripping/multiple stripping max. 999.9 mm
Wire outer diameter max. 16 mm
Flat cable width max. 16 mm
Wire cross section min. 0.22 mm²
Wire cross section max. 70 mm²
Positioning accuracy of rotary incision blades 0.01 mm
Wire draw-in speed max. 4 m/s
Drive system Belt drive
Wire guide, side 1 Swivel guide
Wire guide, side 2 Fixed guide / split wire guide
Noise level < 80 dB
Electrical connection 115/230 VAC ± 10%, 50/60 Hz, 680 VA
Wire protection/ground 6 A
Nominal output (average) 380 VA
Compressed-air connection 5-8 bar
Compressed-air quality oiled or unoiled, not alternating
Air consumption 10 l/min
Operating pressure 6 bar
Weight 110 kg
Dimensions/length 1005 mm
Dimensions/width 760 mm
Dimensions/height 380 mm
Installation location Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min 630 x 690 mm
Load capacity of production table min. 110 kg
Humidity, non-condensing 90 %
Temperature operation 10-40 °C
Wire length, processing on both sides min. 1 mm
Wire length max. 800000 mm
Strip lengths, full stripping side 1 max. 180 mm
Strip lengths, full stripping side 2 max. 50 mm
Strip lengths, partial stripping/multiple stripping max. 999.9 mm
Wire outer diameter max. 16 mm
Flat cable width max. 16 mm
Wire cross section min. 0.22 mm²
Wire cross section max. 70 mm²
Positioning accuracy of rotary incision blades 0.01 mm
Wire draw-in speed max. 4 m/s
Drive system Belt drive
Wire guide, side 1 Swivel guide
Wire guide, side 2 Fixed guide / split wire guide
Noise level < 80 dB
Electrical connection 115/230 VAC ± 10%, 50/60 Hz, 680 VA
Wire protection/ground 6 A
Nominal output (average) 380 VA
Compressed-air connection 5-8 bar
Compressed-air quality oiled or unoiled, not alternating
Air consumption 10 l/min
Operating pressure 6 bar
Weight 110 kg
Dimensions/length 1005 mm
Dimensions/width 760 mm
Dimensions/height 380 mm
Installation location Level, stable and vibration-free support surface (e.g., Komax production table)
Size of production table (L x W) min 630 x 690 mm
Load capacity of production table min. 110 kg
Humidity, non-condensing 90 %
Temperature operation 10-40 °C