Komax 36 - Wire, Hose and Flat Cable cutting machine
Fully Programmable Cutting and Stripping for Long Stripping Lengths and Large Wire Cross Sections
Handles a wide varie of multiconductor cables and discrete wires with up to 8"stripping on both ends.
The KOMAX 36 offers extra long stripping lengths of multi-conductor cables and solid or stranded wire in a fully programmable bench-top machine. A microprocessor-controlled cutting function completely eliminates time-consuming blade changes. No tooling changes means less than a minute is necessary to
feed the wire and recall specs from the membrane keypad for fast resetting of:
The KOMAX 36 also allows you to strip multiconductor wires and difficult insulations in a series of programmed steps. Process wires with an outside diameter of up to 0.53" by using optional quick-chanqe guide tubes.
The membrane keypad means extra reliability and durability In a production environment.
Technical Specifications
Wire gauge: 8 AWG to 28 AWG (Stranded)
Stripping length (U.S. Meas.): 0.01" to 7.O"
Stripping length (Metric Meas.): 0.3mm to 200mm
Minimum wire length: 8.27" (21Omm) plus needed strip lengths
Maximum wire length: 328' (100m)
Maximum wire 0.D.: up to 0.53" 0.D. (13.5mm)
Electronics: Microprocessor controlled
Wire feed mechanism: Two microprocessor-controlled high-torque stepping motors
Cut/Strip mechanism: V-Blades opened and closed by Microprocessor-controlled variable speed stepping motor
Power requirements: 110-220 V / 50-60Hz 8A
Air requirements: 4 - 5 bar (58 psi - 72 psi)
Weight: 82 lbS (37kg)
Production rate: Varies by wire type, wire length, and stripping length.
Reference value: 1030 wires/hr., assuming wire is 1 meter lang,
stripping length is 2 x75mm, diameter is 7mm
Physical dimensions:28.96" (735mm) width x 16.55" (420mm) depth x 11" (280mm) height
Maximum feed speed: 4.26' per second (1.3m/s)
Handles a wide varie of multiconductor cables and discrete wires with up to 8"stripping on both ends.
The KOMAX 36 offers extra long stripping lengths of multi-conductor cables and solid or stranded wire in a fully programmable bench-top machine. A microprocessor-controlled cutting function completely eliminates time-consuming blade changes. No tooling changes means less than a minute is necessary to
feed the wire and recall specs from the membrane keypad for fast resetting of:
- wire diameters, lengths, and gauges
- individual insulation draw-off both ends
- wire transport speeds
- piece, total, and batch counts
- electronic memory (for up to 150 different setups)
The KOMAX 36 also allows you to strip multiconductor wires and difficult insulations in a series of programmed steps. Process wires with an outside diameter of up to 0.53" by using optional quick-chanqe guide tubes.
The membrane keypad means extra reliability and durability In a production environment.
Technical Specifications
Wire gauge: 8 AWG to 28 AWG (Stranded)
Stripping length (U.S. Meas.): 0.01" to 7.O"
Stripping length (Metric Meas.): 0.3mm to 200mm
Minimum wire length: 8.27" (21Omm) plus needed strip lengths
Maximum wire length: 328' (100m)
Maximum wire 0.D.: up to 0.53" 0.D. (13.5mm)
Electronics: Microprocessor controlled
Wire feed mechanism: Two microprocessor-controlled high-torque stepping motors
Cut/Strip mechanism: V-Blades opened and closed by Microprocessor-controlled variable speed stepping motor
Power requirements: 110-220 V / 50-60Hz 8A
Air requirements: 4 - 5 bar (58 psi - 72 psi)
Weight: 82 lbS (37kg)
Production rate: Varies by wire type, wire length, and stripping length.
Reference value: 1030 wires/hr., assuming wire is 1 meter lang,
stripping length is 2 x75mm, diameter is 7mm
Physical dimensions:28.96" (735mm) width x 16.55" (420mm) depth x 11" (280mm) height
Maximum feed speed: 4.26' per second (1.3m/s)