AMP-O-LECTRIC Stripper Crimper Machine
AMP-O-LECTRIC Stripper Crimper
This semiautomatic bench machine strips and terminates wire in a single operation. You simply position the wire against a spot illuminated on the wire stop and cycle the machine. In the automatic mode, the machine cycles when the wire touches the wire stop. Using interchangeable applicators, this versatile machine is ideal for terminating jacketed cable with a variety of pin and socket contacts including AMPLIMITE Subminiature D, MATE-N-LOK and Multimate Type III+. Applicators are also available for non-AMP products. The minimum wire breakout (wire length that must be exposed) is only .72 [18].
Fast Facts
In addition to the use of quick change applicators, machine adjustments have been simplified to reduce set-up times. Strip blades are keyed for ease of alignment; strip length and cutting depth are easily adjusted from the front of the machine without special tools. To compensate for variations in feed points of different terminal strips, simply turn an adjustment knob.
For highly accurate, real-time monitoring of every crimp, the Stripper Crimper can be equipped with crimp quality monitoring (CQM). It’s the only system available that checks crimp height as well as the crimp force curve. It also provides visual and audible alerts of questionable crimps, plus ports for printing and networking. And, to maintain tight crimp tolerances, the Stripper-Crimper allows you to adjust crimp height in .0005 [0.0127] increments.
Other features include a convenient scrap removal system consisting of a disposal chute and collection tray, and a lock-out/tag-out device to prevent accidentally restoring air to the machine during maintenance and repair.
This semiautomatic bench machine strips and terminates wire in a single operation. You simply position the wire against a spot illuminated on the wire stop and cycle the machine. In the automatic mode, the machine cycles when the wire touches the wire stop. Using interchangeable applicators, this versatile machine is ideal for terminating jacketed cable with a variety of pin and socket contacts including AMPLIMITE Subminiature D, MATE-N-LOK and Multimate Type III+. Applicators are also available for non-AMP products. The minimum wire breakout (wire length that must be exposed) is only .72 [18].
Fast Facts
- Strip and terminate wires 32-14 AWG [0.03-2 mm2]
- Fast set-up times: 10 minutes or less
- Illuminated target area
- Convenient scrap removal
- Select foot switch or wiresensor mode of operation
- Lock-out/tag-out device per OSHA Standards #29CFR1910.147
- Air-powered machine operation
- Wire breakouts down to 0.72 [18]
- Precision crimp adjustment in .0005 [0.0127] increments
In addition to the use of quick change applicators, machine adjustments have been simplified to reduce set-up times. Strip blades are keyed for ease of alignment; strip length and cutting depth are easily adjusted from the front of the machine without special tools. To compensate for variations in feed points of different terminal strips, simply turn an adjustment knob.
For highly accurate, real-time monitoring of every crimp, the Stripper Crimper can be equipped with crimp quality monitoring (CQM). It’s the only system available that checks crimp height as well as the crimp force curve. It also provides visual and audible alerts of questionable crimps, plus ports for printing and networking. And, to maintain tight crimp tolerances, the Stripper-Crimper allows you to adjust crimp height in .0005 [0.0127] increments.
Other features include a convenient scrap removal system consisting of a disposal chute and collection tray, and a lock-out/tag-out device to prevent accidentally restoring air to the machine during maintenance and repair.